INTERDISCIPLINARY ENGINEER - Small & Medium UUV Systems
Location:
Keyport, NJ
Description:
Job DescriptionSummary You will serve as an Engineer working within the In-Service Engineering Agent (ISEA) team on Unmanned Undersea Vehicle (UUV) systems and Research & Development (R&D) projects within the Small & Medium Diameter Unmanned Undersea Vehicles Branch of the Unmanned Systems Integration Division t the Naval Undersea Warfare Center, Division Keyport, Washington (NAVUNSEAWARCENDIV KEYPORT WA). This job is open to Career transition (CTAP, ICTAP, RPL) Federal employees who meet the definition of a "surplus" or "displaced" employee. Individuals with disabilities Internal to an agency Current federal employees of this agency. Land & base management Certain current or former term or temporary federal employees of a land or base management agency. Military spouses Special authorities Individuals eligible under a special authority not listed above, but defined in the federal hiring regulations. Veterans Clarification from the agency Current permanent employees of DoD, DoD Military Spouse Preference (MSP) eligibles, DoD Military Reserve (MR) and National Guard (NG) Technician Preference eligibles and DoD Retained Grade Preference eligibles, and VEOA eligibles. Duties You will utilize engineering judgement to plan, schedule, and conduct a detailed investigation and troubleshooting of UUV electro/mechanical and software systems with several complex features. You will then propose operational and maintenance solutions within the In-Service Engineering Agent (ISEA) team supporting multiple UUV Programs of Record and Research and Development projects. You will review technical requirements of UUV systems and components for implementation into maintenance and test procedures, which will be used to perform periodic maintenance, payload integration, and capability upgrades to UUV systems. You will perform studies of new UUV components for technical feasibility to solve obsolescence issues and document proposed changes for Technical Authority approval and future UUV system integration. You will design devices, equipment, or systems using established criteria or specifications on Research and Development projects to provide novel solutions to increase capabilities of UUV systems. You will design and write test procedures for components and electro/mechanical systems for compliance to design requirements. You will conduct tests in a laboratory setting and on range (in-water test events) following system maintenance (sea trials) or to validate new component integration for Engineering Change Proposals (ECPs). Requirements Conditions of Employment Must be a US Citizen. Must be determined suitable for federal employment. Must participate in the direct deposit pay program. New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement. Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326. Males born after 12-31-59 must be registered for Selective Service. This is a bargaining unit position. You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal. This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time. Qualifications Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: As a professional engineer troubleshooting electrical, mechanical, computer, or software components and systems; reading and understanding technical manuals and engineering drawings; writing and following maintenance processes and procedures (maintenance instructions, Departure from Specification (DFS), Liaison Action Requests (LARs), deficiency documents); evaluating in-service equipment condition, assessing the equipment against technical requirements, understanding technical authority boundaries of their position, and utilizing engineering judgement to recommend a solution. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND All Professional Engineering Positions, 08XX Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. OR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/ HowtoGetLicensed/index.html OR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. Additional information This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/ Military Spouse Preference applicants will receive priority consideration at the Full Performance Level (FPL) and if determined to be Best Qualified at the FPL, and selected, must be placed at the FPL. A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired on this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral Lists will be issued on an as needed basis as vacancies occur. All eligibility, qualifications, and time-in-grade requirements must be met by the referral cut-off date. Benefits A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. How You Will Be Evaluated You will be evaluated for this job based on how well you meet the qualifications above. When the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcement. You will be rated based on the information provided in your resume and responses to the Occupational Questionnaire, along with your supporting documentation to determine your ability to demonstrate the following competencies: ORAL COMMUNICATION PARTNERING PROBLEM SOLVING WRITTEN COMMUNICATION You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation. If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, your score may be adjusted to more accurately reflect your abilities or you may be found ineligible/not qualified. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment. All eligibility, qualifications, and time-in-grade requirements must be met by the closing date of this announcement. Benefits A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. Required Documents As a new or existing federal employee, you and your family may have access to a range of benefits. Your benefits depend on the type ...
Company:
Naval Sea Systems Command
Posted:
July 7 on TopUSAJobs
Visit Our Partner Website
This listing was posted on another website. Click here to open: Go to TopUSAJobs
Important Safety Tips
- Always meet the employer in person.
- Avoid sharing sensitive personal and financial information.
- Avoid employment offers that require a deposit or investment.
To learn more, visit the Safety Center or click here to report this listing.
More About this Listing: INTERDISCIPLINARY ENGINEER - Small & Medium UUV Systems
INTERDISCIPLINARY ENGINEER - Small & Medium UUV Systems is a Engineering Engineer Job at Naval Sea Systems Command located in Keyport NJ. Find other listings like INTERDISCIPLINARY ENGINEER - Small & Medium UUV Systems by searching Oodle for Engineering Engineer Jobs.
INTERDISCIPLINARY ENGINEER - Small & Medium UUV Systems is a Engineering Engineer Job at Naval Sea Systems Command located in Keyport NJ. Find other listings like INTERDISCIPLINARY ENGINEER - Small & Medium UUV Systems by searching Oodle for Engineering Engineer Jobs.